A very comprehensive kit that will enable all but the early locomotives, which had the large external strap hinges on the body side doors, to be built.
The cab is tabbed to fit the footplate and is a one piece fold up. A cab side overlay provides the rivet detail
The cab can be supplied with or without half etched chevron markings on the back for ease of painting of the black and yellow sections.
The cab roof is half etched for the rivet detail. This also makes it easy to form to the correct shape. The roof hatch can be fitted either open or closed.
The bonnet, which like the cab is tabbed to fit the footplate, is easy form and has half etched markings for all the door combinations and the various holes for door handles and grab handles matching those on the doors are etched through to assist with locating the overlays.
All the various combinations of bonnet side door, footplate boxes and both wood and steel cab side doors are included
Chassis etched on 0.018" nickel silver
Comprises an inside fold up chassis for 12mm or 14.2mm gauge coupling rods
with overlays, outside frames with etched springs and axle boxes, front and
rear steps, full brake gear and two sets of outside cranks for use on 2mm
or 3mm axles. (2mm recommended).
We can also provide outside cranks to fit the Romford extended axles
08 Version 1 - Body etched on 0.010" n/s cab with chevrons etched in
08 Version 2 - Body etched on 0.010" n/s cab without chevrons
08 Version 3 - Body etched on 0.012" brass cab with chevrons etched in
08 Version 4 - Body etched on 0.012" brass cab without chevrons
Price £45 - Body only £30